The EZLoop VoIP FXS1 Adapter is a one-port telephone adapter with a four port Switch/Hub.
The EZLoop VoIP FXS1 provides Data transfer by 10Mbps, telephone services and T.38 fax over IP network. The EZLoop VoIP FXS1 is most suitable for SOHO and/or a small-to-medium Internet communication environment.

Features

Easy access to IP from phone set or PBX

Cost Saving - Telephone call from VPN or public Internet

Follows the existing telephone call dial plan

Easy interface to ADSL/Cable Modem or Leased line equipment

Software Specifications

Protocol Supported

Downlink: 10/100 BaseT Ethernet

Supplementary Service

1x168 pin DIMM max. up to 512MB
-64MB SDRAM onboard (for 400MHz CPU)
-128MB SDRAM onboard (for 800MHz CPU)

FAX Support

VIA VT8601T + VT82C686B

Codec Supported

Phoenix-Award BIOS with 2Mbit Flash

Vocie Quality

CompactFlash TM Type II Socket (512 MB)

QoS

Dallas DS2401 controller

Caller ID

System rest and NMI; 64 Levels,
0.5 ~ 8 / 5 ~ 80 / 50 ~ 800 / 100 ~ 1600 Seconds

Tone

Mini PCI Type-III socket (for 800MHz CPU ver.)

TCP/IP

Lithium 3V/196 mAH

ADSL Environment

203mm x 146mm/ 0.32kg

Firewall Environment

0 ~ 60deg C, operation

Security

105 ~ 95% relative humidity, non-condensing

Configuration & Management

Console port, TELNET and Web Browser

Upgrade

Firmware upgrade through network by TFTP/FTP

Mechanical Specifications

Power

Input AC 100V~240V Output DC12V

Operation Temperature

41 ~ 104°F (5 ~ 40°C)

Humidity

10% to 90% (Non-condensing)

Dimension and Weight

6.5” (165mm) W x 1.14” (29mm) H x 5.47” X (139mm) L
2.22 lbs (1 kg)

Console Interface

One DB-9 RS-232 COM port

Network Interface

Four 10/100Base-T EthernetRJ-45 ports
(auto LAN MDI/MDIX)

FXS Interface

One RJ-11 Telephone port (FXS)
Programmable AC impedance,Feeding voltage, Ring Voltage, Ring Cadence, Loop current and
call progress tone
ON-Hook Voltage: 48Vdc
Ring Voltage: 50 V RMS
Loop Current: Constant 23mA

Application Diagram

Home

Voip Home

Contact

Support